3.
Execute the showfru command to check the set memory mirror mode.
XSCF> showfru -a
Device Location Memory Mirror Mode
sb 00-0
cpu 00-0-0 yes
cpu 00-0-1 yes
cpu 00-0-2 yes
cpu 00-0-3 yes
7.7
Creating a Physical Partition
Configuration List (PCL)
A physical partition (PPAR) consists of physical system boards (PSBs). In the
physical partition, the hardware resources of a physical system board (PSB) can be
assigned to logical system boards (LSB).
Use the showpcl command to check a physical partition configuration list (PCL), and
use the setpcl command to set a PCL.
For an explanation of the setpcl command options, see the setpcl command man page
or the Fujitsu M10/SPARC M10 Systems XSCF Reference Manual.
For the SPARC M10-1/M10-4 system, a physical partition configuration list is already
set. For the SPARC M10-1/M10-4 system, only the configuration policy can be set.
Physical system board (PSB)
■
The PSB consists of all physical components mounted on a SPARC M10 System
chassis such as CPUs and memory. In other words, the physical system board
(PSB) of the SPARC M10-1 is a motherboard unit, and that of the SPARC
M10-4/M10-4S is a CPU memory unit (containing the <CMUL> on the bottom and
the <CMUU> on top). The other devices that are treated as physical system boards
(PSBs) may include PCIe cards and disk devices. Sometimes, a physical unit of
hardware being installed/removed/replaced is described as a physical system
board (PSB).
Logical system board (LSB)
■
The LSB is a logical unit name assigned to a physical system board (PSB). Each
physical partition has a set of logical system boards (LSBs) assigned to it. A logical
system board number is used to control how resources such as kernel memory are
assigned to each logical domain.
System board
■
This term is used to describe hardware resources in operations such as configuring
or displaying a physical partition.
1.
Execute the showpcl command to check a physical partition configuration list
(PCL).
No physical partition configuration list (PCL) is set in the factory default settings.
Fujitsu M10/SPARC M10 Systems Installation Guide ・ July 2015
214