Console Switch - Fujitsu SE500 Basic Operating Manual

Controls

5.2 Console switch

The monitor, keyboard and mouse port of the integrated rack console are connected to the
corresponding ports on the integrated units (Management Unit, Server Unit x86, HNC, and
Application Unit) and thus attached to one of them.
By default, the rack console is attached to the first Management Unit.
The console switch is usually a digital 8-port KVM switch. The KVM switch is integrated into
the rack in a vertical position and therefore does not require the installation of a height unit.
In the maximum configuration, 5 KVM ports (2 x MU and 3 x SU x86) are occupied in the
SE300, and 8 KVM ports (2 x MU, 4 x HNC and 2 x SU x86) in the SE500/SE700.
If more AUs are to be integrated into the SE server, the KVM switch can be replaced with
a different KVM switch with 16 or 32 ports.
U41858-J-Z126-2-76
Console switch
43