Switch Settings; Switch Location And Settings - Fujitsu PRIMERGY TX200 S2 User Manual

Chapter 8 Configuring Hardware and Utilities

8.1 Switch Settings

The BIOS password setting can be deleted through the switch block settings.
Do not change the switch settings except when deleting the BIOS password.

8.1.1 Switch Location and Settings

■ Switch Location
The switch block of the server is located on the baseboard as shown below.
■ Switch Settings
The switch settings are as follows:
Switch number
Switch 1
Switch 2
Switch 3
Switch 4
230
Switch block
table: Switch Settings
Always keep in OFF position.
When deleting the password turn to "ON". After the operation always
return the switch to its original "OFF" position.
Always keep in OFF position.
Always keep in OFF position.
Description