IPv6 Multicast Commands
configure mld snooping vlan ports delete static router
configure mld snooping {vlan} <vlanname> ports <portlist> delete static
router
Description
Configures VLAN ports to stop forwarding the traffic from all multicast groups, unless MLD joins have
been received on the port.
Syntax Description
vlanname
portlist
Default
None.
Usage Guidelines
Use this command to remove the configuration that forwards all multicast groups to the specified
VLAN ports.
Example
The following command removes a static MLD entry so all multicast groups will not be forwarded to
VLAN marketing on ports 2:1-2:4, unless an MLD join is received on the port:
configure mld snooping marketing ports 2:1-2:4 delete static router
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
1592
Specifies a VLAN name.
Specifies one or more ports or slots and ports. On a modular switch, it can be
a list of slots and ports. On a stand-alone switch, it can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.
ExtremeWare XOS 11.3 Command Reference