Configure Mld Snooping Vlan Ports Delete Static Group - Extreme Networks ExtremeWare XOS Command Reference Manual

IPv6 Multicast Commands

configure mld snooping vlan ports delete static group

configure mld snooping {vlan} <vlanname> ports <portlist> delete static
group [all | <v6grpipaddress>]
Description
Removes the configuration that causes VLAN ports to receive the traffic from a multicast group, even if
no MLD joins have been received on the port.
Syntax Description
vlanname
portlist
all
v6grpipaddress
Default
None.
Usage Guidelines
Use this command to delete a static group from a particular VLAN port.
To add a static group, use the following command:
configure mld snooping {vlan} <vlanname> ports <portlist> add static
group <v6grpipaddress>
Example
The following command removes a static MLD entry so the multicast group ff02::a:b will not be
forwarded to VLAN marketing on ports 2:1-2:4, unless an MLD join message is received on the port:
configure mld snooping marketing ports 2:1-2:4 delete static group ff02::a:b
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
1590
Specifies a VLAN name.
Specifies one or more ports or slots and ports. On a modular switch, it can be
a list of slots and ports. On a stand-alone switch, it can be one or more port
numbers. In the form 1, 2, 3-5, 2:5, 2:6-2:8.
Specifies all multicast groups.
Specifies the multicast group IPv6 address.
ExtremeWare XOS 11.3 Command Reference