Show Pim - Extreme Networks ExtremeWare XOS Command Reference Manual

IP Multicast Commands

show pim

show pim {detail | rp-set {<group_addr>} | vlan <vlan_name>}
Description
Displays the PIM configuration and statistics.
Syntax Description
detail
group_addr
vlan_name
Default
If no VLAN is specified, the configuration is displayed for all PIM interfaces.
If no multicast group is specified for the
Usage Guidelines
The version of this command displays the global statistics for PIM, as well as the details of each
detail
PIM enabled VLAN.
Examples
The following command displays the PIM configuration and statistics for the VLAN accounting:
show pim accounting
The following is sample output from the command:
PIM SPARSE Interface[6] on VLAN accounting is enabled and up
IP adr: 10.10.10.2
Passive
Hello Interval
Neighbor Time out
Join/Prune Interval : 60 sec
Join/Prune holdtime : 210 sec
Trusted Gateway
CRP group List
Shutdown priority
Packet Statistics (In/Out)
Hellos
Join/Prunes
Grafts
1576
Specifies to display the detailed format.
Specifies an IP multicast group, for which the RP is to be displayed.
Specifies a VLAN name.
option (Rendezvous Point set), all RPs are displayed.
rp-set
mask: 255.255.255.0
: No
: 30 sec
: 105 sec
: none
: pim-rp2 with priority 0
: 1024
0 3 Bootstraps
0 0 Asserts
0 0 GraftAcks
DR of the net: 10.10.10.2
0
0
0
ExtremeWare XOS 11.3 Command Reference
1
0
0