ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
ACL Commands
clear access-list meter
clear access-list meter {<metername>} [any | ports <portlist> | vlan
<vlanname>]
Description
Clears the specified access list meters.
Syntax Description
metername
portlist
vlanname
Default
N/A.
Usage Guidelines
Use this command to clear the out-of-profile counters associated with the meter configuration.
Example
The following example clears all the out-of-profile counters for the meters of the ACL on port 2:1:
clear access-list meter port 2:1
The following example clears the out-of-profile counters for the meter meter2 of the ACL on port 2:1
clear access-list meter meter2 port 2:1
History
This command was available in ExtremeWare XOS 11.1.
Platform Availability
This command is available only on the BlackDiamond 8800 family and Summit X450 switches.
830
Specifies the ACL meter to clear.
Specifies to clear the counters on these ports.
Specifies to clear the counters on the VLAN.
ExtremeWare XOS 11.5 Command Reference Guide
Need help?
Do you have a question about the ExtremeWare XOS and is the answer not in the manual?