Data-Forwarding - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

data-forwarding

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
2358
®
OS for EX Series Ethernet Switches, Release 10.3
data-forwarding {
source {
groups group-prefix;
}
receiver {
source-vlans vlan-list;
install;
}
}
[edit protocols igmp-snooping vlan vlan-id | vlan-number]
Statement introduced in Junos OS Release 9.6 for EX Series switches.
Configure the VLAN to be a multicast source VLAN (MVLAN) or a multicast VLAN
registration (MVR) receiver VLAN. Each data-forwarding VLAN, which can be a multicast
source VLAN (MVLAN) or a multicast receiver VLAN, must have exactly one source
statement or exactly one receiver statement. A data-forwarding VLAN can operate only
in IGMPv2 mode.
The remaining statements are explained separately.
Disabled.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
[edit protocols] Configuration Statement Hierarchy on page 56
Example: Configuring Multicast VLAN Registration on EX Series Switches on page 2326
Configuring Multicast VLAN Registration (CLI Procedure) on page 2336
Copyright © 2010, Juniper Networks, Inc.