Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2176

For ex series ethernet switches
Hide thumbs Also See for JUNOS OS 10.3 - SOFTWARE:
Table of Contents

Advertisement

Complete Software Guide for Junos
Table 259: show bgp neighbor Output Fields (continued)
Field Name
Field Description
Configured BGP options:
Options
Path-attributes
Path attribute codes that are dropped from neighbor updates.
dropped
Path-attributes ignored
Path attribute codes that are ignored during neighbor updates.
Authentication key
Name of the authentication key chain enabled.
change
Type of authentication algorithm enabled:
Authentication
algorithm
Names of configured address families for the VPN.
Address families
configured
Address of the local routing device.
Local Address
Hold time configured with the
Holdtime
keepalive messages are sent.
Flags for NLRI
Flags related to labeled-unicast:
inet-label-unicast
2080
®
OS for EX Series Ethernet Switches, Release 10.3
—Configured address family:
AddressFamily
—Authentication key change is enabled.
AutheKeyChain
DropPathAttributes
—Certain path attributes are configured to be dropped from neighbor updates
during inbound processing.
GracefulRestart
—Graceful restart is configured.
HoldTime
—Hold time configured with the
interval at which keepalive messages are sent.
—Certain path attributes are configured to be ignored in neighbor updates
IgnorePathAttributes
during inbound processing.
—Address configured with the
Local Address
—Allow BGP connections to external peers that are not on a directly connected network.
Multihop
—Configured MBGP state for the BGP group:
NLRI
.
nlri any
Peer AS
—Configured peer autonomous system (AS).
Preference
—Preference value configured with the
—Configured to refresh automatically when the policy changes.
Refresh
—Configured routing table group.
Rib-group
hold-time
—Collection of statistics for labeled-unicast traffic is enabled.
TrafficStatistics
or
.
inet
inet-vpn
hold-time
statement. The hold time is three times the
statement.
local-address
,
, or both if you have configured
multicast
unicast
preference
statement.
or
hmac
md5
statement. The hold time is three times the interval at which
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

Table of Contents