Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2323

show route inactive-path
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show route show route
inactive-path inactive-path
Copyright © 2010, Juniper Networks, Inc.
show route inactive-path
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route inactive-path
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display routes for destinations that have no active route. An inactive route is a route that
was not selected as the best path.
—Display all inactive routes.
none
brief | detail | extensive | terse
not specify a level of output, the system defaults to brief.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show route inactive-path on page 2227
show route inactive-path detail on page 2228
show route inactive-path extensive on page 2229
show route inactive-path terse on page 2229
For information about output fields, see the output field tables for the show route
command, the show route detail command, the show route extensive command, or the
show route terse command.
user@host> show route inactive-path
inet.0: 25 destinations, 26 routes (24 active, 0 holddown, 1 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both
10.12.100.12/30 [OSPF/10] 03:57:28, metric 1
> via so-0/3/0.0
private1__.inet.0: 2 destinations, 3 routes (2 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.0.0.0/8 [Direct/0] 04:39:56
> via fxp1.0
red.inet.0: 6 destinations, 8 routes (4 active, 0 holddown, 3 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both
Chapter 74: Operational Commands for Layer 3 Protocols
—(Optional) Display the specified level of output. If you do
—(Optional) Perform this operation on all logical
2227