Show (Ospf | Ospf3) Interface - Juniper JUNOS OS 10.3 - SOFTWARE Manual

For ex series ethernet switches
Hide thumbs Also See for JUNOS OS 10.3 - SOFTWARE:
Table of Contents

Advertisement

show (ospf | ospf3) interface

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Copyright © 2010, Juniper Networks, Inc.
show (ospf | ospf3) interface
<brief | detail | extensive>
<area area-id>
<interface-name>
<instance instance-name>
<logical-system (all | logical-system-name)>
<realm (ip4-multicast | ipv4-unicast | ipv6-multicast)>
show (ospf | ospf3) interface
<brief | detail | extensive>
<area area-id>
<interface-name>
<instance instance-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
area
option introduced in Junos OS Release 9.2.
option introduced in Junos OS Release 9.2 for EX Series switches.
area
option introduced in Junos OS Release 9.2.
realm
Display the status of Open Shortest Path First (OSPF) interfaces.
—Display standard information about the status of all OSPF interfaces for all routing
none
instances
brief | detail | extensive
—(Optional) Display the specified level of output.
—(Optional) Display information about the interfaces that belong to the
area area-id
specified area.
interface-name
—(Optional) Display information for the specified interface.
—(Optional) Display all OSPF interfaces under the named routing
instance instance-name
instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)
information about the interfaces for the specified OSPFv3 realm, or address family.
Use the
option to specify an address family for OSPFv3 other than IPv6 unicast,
realm
which is the default.
view
show ospf interface brief on page 2039
show ospf interface detail on page 2039
show ospf3 interface detail on page 2040
show ospf interface detail(When Multiarea Adjacency Is Configured) on page 2040
Chapter 74: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
—(Optional) (OSPFv3 only) Display
2037

Advertisement

Table of Contents
loading

Table of Contents