Table of Contents
Advertisement
Complete Software Guide for Junos
show route terse
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Table 297: show route terse Output Fields
Field Name
Field Description
routing-table-name
Name of the routing table (for example,
number destinations
Number of destinations for which there are routes in the routing table.
number routes
Number of routes in the routing table and total number of routes in the following states:
route key
Key for the state of the route:
A
Active route. An asterisk (*) indicates this is the active route.
Destination
Destination of the route.
2300
®
OS for EX Series Ethernet Switches, Release 10.3
show route terse
<logical-system (all | logical-system-name)>
show route terse
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display a high-level summary of the routes in the routing table.
—Display a high-level summary of the routes in the routing table.
none
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show route terse on page 2302
Table 297 on page 2300 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
active
(routes that are active)
holddown
(routes that are in the pending state before being declared inactive)
(routes that are not used because of a routing policy)
hidden
+
—A plus sign indicates the active route, which is the route installed from the routing table into the
forwarding table.
-
—A hyphen indicates the last active route.
—An asterisk indicates that the route is both the active and the last active route. An asterisk before
*
a
line indicates the best subpath to the route.
to
—(Optional) Perform this operation on all logical
show route terse
inet.0
).
Copyright © 2010, Juniper Networks, Inc.
command.
Advertisement
Chapters
Table of Contents
Troubleshooting
