Clear Isis Adjacency - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

clear isis adjacency

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
clear isis adjacency clear isis adjacency
2024
®
OS for EX Series Ethernet Switches, Release 10.3
clear isis adjacency
<instance instance-name>
<interface interface-name>
<logical-system (all | logical-system-name)>
<neighbor>
clear isis adjacency
<instance instance-name>
<interface interface-name>
<neighbor>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Remove entries from the Intermediate System-to-Intermediate System (IS-IS) adjacency
database.
none —Remove all entries from the adjacency database.
—(Optional) Clear all adjacencies for the specified routing instance
instance instance-name
only.
interface interface-name —(Optional) Clear all adjacencies for the specified interface only.
logical-system (all | logical-system-name)
systems or on a particular logical system.
neighbor —(Optional) Clear adjacencies for the specified neighbor only.
clear
show isis adjacency on page 2095
clear isis adjacency on page 2024
See show isis adjacency for an explanation of output fields.
The following sample output displays IS-IS adjacency database information before and
after the
clear isis adjacency
user@host> show isis adjacency
IS-IS adjacency database:
Interface System
so-1/0/0.0 karakul
so-1/1/3.0 1921.6800.5080 3 Up
so-5/0/0.0 1921.6800.5080 3 Up
user@host> clear isis adjacency karakul
—(Optional) Perform this operation on all logical
command is entered:
L State Hold (secs) SNPA
3 Up
Copyright © 2010, Juniper Networks, Inc.
26
23
19