Table 261: Show Ipv6 Neighbors Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos
show ipv6 neighbors
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
show ipv6 neighbors show ipv6 neighbors
show ipv6 neighbors
2094
®
OS for EX Series Ethernet Switches, Release 10.3
show ipv6 neighbors
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.3 for EX Series switches.
Display information about the IPv6 neighbor cache.
This command has no options.
view
clear ipv6 neighbors on page 1228
show ipv6 neighbors on page 2094
show ipv6 neighbors on page 2094
Table 183 on page 1275 describes the output fields for the
Output fields are listed in the approximate order in which they appear.

Table 261: show ipv6 neighbors Output Fields

Field Name
IPv6 Address
Linklayer Address
State
Exp
Rtr
Secure
Interface
user@host> show ipv6 neighbors
IPv6 Address
fe80::2a0:c9ff:fe5b:4c1e
user@host > show ipv6 neighbors
IPv6 Address
Interface
fe80::14fb:5dcf:54bd:ff76
ge-3/2/0.0
Field Description
Name of the IPv6 interface.
Link-layer address.
State of the link: , ,
up down incomplete
.
unreachable
Number of seconds until the entry expires.
Whether the neighbor is a routing device:
Whether this entry was created using the Secure Neighbor Discovery
(SEND) protocol: or .
yes no
Name of the interface.
Linklayer Address State
00:a0:c9:5b:4c:1e reachable
Linklayer Address State
00:90:69:a0:a8:bc stale
command.
show ipv6 neighbors
, , , or
reachable stale
or .
yes no
Exp Rtr Interface
15 yes fxp0.0
Exp Rtr Secure
1113 yes yes
Copyright © 2010, Juniper Networks, Inc.