Table 253: Show (Ospf | Ospf3) Statistics Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show (ospf | ospf3) statistics
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Copyright © 2010, Juniper Networks, Inc.
show (ospf | ospf3) statistics
<instance instance-name>
<logical-system (all | logical-system-name)>
<realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)>
show (ospf | ospf3) statistics
<instance instance-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced in Junos OS Release 9.2.
realm
Display OSPF statistics.
—Display OSPF statistics for all routing instances.
none
instance instance-name —(Optional) Display all statistics for the specified routing instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)
all statistics for the specified OSPFv3 realm, or address family. Use the
to specify an address family for OSPFv3 other than IPv6 unicast, which is the default.
view
clear (ospf | ospf3) statistics on page 2017
show ospf statistics on page 2062
Table 253 on page 2061 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.

Table 253: show (ospf | ospf3) statistics Output Fields

Field Name
Packet type
Total Sent/Total Received
Last 5 seconds Sent/Last 5
seconds Received
LSAs retransmitted
Chapter 74: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
—(Optional) (OSPFv3 only) Display
show (ospf | ospf3) statistics
Field Description
Type of OSPF packet.
Total number of packets sent and received.
Total number of packets sent and received in the last 5 seconds.
Total number of link-state advertisements transmitted, and number
retransmitted in the last 5 seconds.
option
realm
2061