Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2078

Complete Software Guide for Junos
Required Privilege
Level
Related
Documentation
1982
®
OS for EX Series Ethernet Switches, Release 10.3
—Provide detailed trace information
detail
—Filter trace information. Applies only to
filter
—Packets being received.
receive
—Packets being transmitted.
send
no-world-readable —(Optional) Prevent any user from reading the log file.
—(Optional) Maximum size of each trace file, in kilobytes (KB), megabytes (MB),
size size
or gigabytes (GB). When a trace file named
trace-file.0 . When the
renamed and
trace-file.1
continues until the maximum number of trace files is reached. Then, the oldest trace
file is overwritten.
If you specify a maximum file size, you also must specify a maximum number of trace
files with the files option.
Syntax: to specify KB,
xk xm
Range: 10 KB through the maximum file size supported on your system
Default: 128 KB
—(Optional) Allow any user to read the log file.
world-readable
routing and trace—To view this statement in the configuration.
routing-control and trace-control—To add this statement to the configuration.
log-updown on page 1850 statement
Tracing BGP Protocol Traffic
Configuring OSPF Refresh and Flooding Reduction in Stable Topologies
route
trace-file
trace-file again reaches its maximum size,
is renamed
trace-file trace-file.0
to specify MB, or to specify GB
xg
and tracing flags.
damping
reaches this size, it is renamed
trace-file.0
. This renaming scheme
Copyright © 2010, Juniper Networks, Inc.
is