Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2402

For ex series ethernet switches
Hide thumbs Also See for JUNOS OS 10.3 - SOFTWARE:
Table of Contents

Advertisement

Complete Software Guide for Junos
Table 298: show vrrp Output Fields (continued)
Field Name
Field Description
Time that the master router has been up.
Master router
uptime
MAC address associated with the virtual IP address.
Virtual MAC
Whether tracking is
Tracking
Current operational priority for being the VRRP master.
Current priority
Configured base priority for being the VRRP master.
Configured priority
Minimum time interval, in seconds, between successive changes to the current
Priority hold-time
priority.
(
Remaining-time
track
Interface tracking
Whether interface tracking is enabled or disabled. When enabled, the output
also displays the number of tracked interfaces.
Name of the tracked interface.
Interface/Tracked
interface
Current operational state of the tracked interface:
Int state/Interface
state
Int speed/Speed
Current operational speed, in bits per second, of the tracked interface.
Incurred priority
Operational priority cost incurred due to the state and speed of this tracked
interface. This cost is applied to the configured priority to obtain the current
cost
priority.
Speed below which the corresponding priority cost is incurred. In other words,
Threshold
when the speed of the interface drops below the threshold speed, the
corresponding priority cost is incurred.
An entry of
the interface is down.
Route tracking
Whether route tracking is enabled or disabled. When enabled, the output also
displays the number of tracked routes.
The number of routes being tracked.
Route count
The IP address of the route being tracked.
Route
The VPN routing and forwarding (VRF) routing instance that the tracked route
VRF name
is in.
Route state
The state of the route being tracked:
2306
®
OS for EX Series Ethernet Switches, Release 10.3
or
enabled
disabled
indicates no minimum interval.
Disabled
option only) Displays the time remaining in the priority hold-time interval.
down
means that the corresponding priority cost is incurred when
.
or
.
up
down
up
,
down
, or
unknown
.
Level of Output
detail, extensive
detail, extensive
detail, extensive
detail, extensive
detail, extensive
detail, extensive
detail
detail extensive
detail extensive
detail, extensive
detail, extensive
detail, extensive
detail, extensive
detail, extensive
detail, extensive
detail, extensive
detail, extensive
detail, extensive
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

Table of Contents