Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2186

Complete Software Guide for Junos
show bgp summary
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Table 260: show bgp summary Output Fields
Field Name Field Description
Groups Number of BGP groups.
Peers Number of BGP peers.
Down peers Number of down BGP peers.
Table Name of routing table.
Tot Paths Total number of paths.
Act Paths Number of active routes.
2090
®
OS for EX Series Ethernet Switches, Release 10.3
show bgp summary
<instance instance-name>
<logical-system (all | logical-system-name)>
show bgp summary
<instance instance-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display Border Gateway Protocol (BGP) summary information.
—Display BGP summary information for all routing instances.
none
instance instance-name —(Optional) Display information for the specified instance only.
The instance name can be master for the main instance, or any valid configured
instance name or its prefix.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show bgp summary (When a Peer Is Not Established) on page 2092
show bgp summary (When a Peer Is Established) on page 2092
show bgp summary (CLNS) on page 2092
show bgp summary (Layer 2 VPN) on page 2092
show bgp summary (Layer 3 VPN) on page 2093
Table 260 on page 2090 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
—(Optional) Perform this operation on all logical
show bgp summary
Copyright © 2010, Juniper Networks, Inc.
command.