Virtual-Inet6-Address - Juniper JUNOS OS 10.3 - SOFTWARE Manual

For ex series ethernet switches
Hide thumbs Also See for JUNOS OS 10.3 - SOFTWARE:
Table of Contents

Advertisement

virtual-inet6-address

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
virtual-inet6-address [addresses];
[edit interfaces interface-name unit logical-unit-number family inet6 address address
vrrp-inet6-group group-id]
Statement introduced in Junos OS Release 10.0 for EX Series switches.
Configure the addresses of the virtual routers in a Virtual Router Redundancy Protocol
(VRRP) IPv6 group. You can configure up to eight addresses.
NOTE: The address of an aggregated Ethernet interface (a LAG) or a routed
VLAN interface (RVI) cannot be assigned as the virtual router address in a
VRRP IPv6 group.
—Addresses of one or more virtual routers. Do not include a prefix length. If the
addresses
address is the same as the interface's physical address, the interface becomes the
master virtual router for the group.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring VRRP for IPv6 (CLI Procedure) on page 1698
Chapter 73: Configuration Statements for Layer 3 Protocols
2005

Advertisement

Table of Contents
loading

Table of Contents