Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2214

Complete Software Guide for Junos
Table 269: show isis interface Output Fields (continued)
Field Name Field Description
Router responsible for sending network link-state advertisements, which describe
Designated Router
all the routers attached to the network.
Hello padding Type of hello padding:
Adaptive
the initial detection of a new neighbor until the neighbor verifies the adjacency
as Up in the adjacency state TLV. If the neighbor does not support the
adjacency state TLV, then padding continues. On LAN connections, padding
starts from the initial detection of a new neighbor until there is at least one
active adjacency on the interface.
Loose
new neighbor until the adjacency transitions to the Up state.
Strict
states, and is continuous.
LDP sync state Current LDP synchronization state:
reason Reason for being in the LDP sync state.
config holdtime Configured value of the hold timer.
remaining If the state is not in sync and the hold time is not infinity, then this field displays
the number of seconds remaining.
show isis interface show isis interface
show isis interface
brief
show isis interface
detail
show isis interface
extensive
2118
®
OS for EX Series Ethernet Switches, Release 10.3
—On point-to-point connections, the hello packets are padded from
—(Default) The hello packet is padded from the initial detection of a
—Padding is performed on all interface types and for all adjacency
in sync
user@host> show isis interface
IS-IS interface database:
Interface L CirID Level 1 DR
at-2/3/0.0 3
lo0.0 0
The output for the
show isis interface brief
isis interface command. For sample output, see show isis interface on page 2118.
user@host> show isis interface detail
IS-IS interface database:
at-2/3/0.0
Index: 66, State: 0x6, Circuit id: 0x1, Circuit type: 3
LSP interval: 100 ms, CSNP interval: 5 s
Level Adjacencies Priority Metric Hello (s) Hold (s) Designated Router
1 1
2 1
lo0.0
Index: 64, State: 0x6, Circuit id: 0x1, Circuit type: 0
LSP interval: 100 ms, CSNP interval: disabled
Level Adjacencies Priority Metric Hello (s) Hold (s) Designated Router
1 0
2 0
user@host> show isis interface extensive
, in holddown , or not supported
Level 2 DR
0x1 Point to Point Point to Point
0x1 Passive Passive
command is identical to that for the
64 10 9.000
64 10 9.000
64 0 Passive
64 0 Passive
Level of Output
detail
extensive
. extensive
extensive
extensive
extensive
L1/L2 Metric
10/10
0/0
show
27
27
Copyright © 2010, Juniper Networks, Inc.