Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2109

For ex series ethernet switches
Hide thumbs Also See for JUNOS OS 10.3 - SOFTWARE:
Table of Contents

Advertisement

Options
Copyright © 2010, Juniper Networks, Inc.
OSPF LSA database and sync the new database with the master Routing Engine. You
can also use the
command with any of the options to discard rather than delete
purge
the specified LSA entries.
CAUTION: This command is useful only for testing. Use it with care, because
it causes significant network disruption.
none
—Delete all LSAs other than the system's own LSAs, which are regenerated. To
resynchronize the database, the system destroys all adjacent neighbors that are in
the state
or higher. The neighbors are then reacquired and the databases
EXSTART
are synchronized.
advertising-router (router-id | self)
by the specified routing device or by this routing device.
—(Optional) Discard entries for the LSAs in the specified area.
area area-id
asbrsummary
—(Optional) Discard summary AS boundary router LSA entries.
—(Optional) Discard external LSAs.
external
instance instance-name
—(Optional) Delete or discard entries for the specified routing
instance only.
—(OSPFv3 only) (Optional) Discard interarea prefix LSAs.
inter-area-prefix
inter-area-router
—(OSPFv3 only) (Optional) Discard interarea router LSAs.
—(OSPFv3 only) (Optional) Discard intra-area prefix LSAs.
intra-area-prefix
logical-system (all | logical-system-name)
systems or on a particular logical system.
—(Optional) Delete link-local LSAs.
link-local
lsa-id lsa-id
—(Optional) Discard the LSA entries with the specified LSA identifier.
—(Optional) Discard summary network LSAs.
netsummary
network
—(Optional) Discard network LSAs.
—(Optional) Discard not-so-stubby area (NSSA) LSAs.
nssa
opaque-area
—(Optional) Discard opaque area-scope LSAs.
realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)
the entries for the specified OSPFv3 realm, or address family. Use the
to specify an address family for OSPFv3 other than IPv6 unicast, which is the default.
—(Optional) Discard router LSAs.
router
Chapter 74: Operational Commands for Layer 3 Protocols
—(Optional) Discard entries for the LSA entries advertised
—(Optional) Perform this operation on all logical
—(OSPFv3 only) (Optional) Delete
realm
option
2013

Advertisement

Table of Contents
loading

Table of Contents