Table 255: Show As-Path Domain Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show as-path domain
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Copyright © 2010, Juniper Networks, Inc.
show as-path domain
<logical-system (all | logical-system-name)>
show as-path domain
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display autonomous system (AS) path domain information.
—(Optional) Display AS path domain information for all routing instances.
none
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show as-path domain on page 2068
Table 255 on page 2067 lists the output fields for the
Output fields are listed in the approximate order in which they appear

Table 255: show as-path domain Output Fields

Field Name
Domain
Primary
References
Number Paths
Flags
Local AS
Loops
Chapter 74: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
show as-path domain
Field Description
Number of independent AS domains. The AS paths of an
independent AS domain are not shared with the AS paths and AS
path attributes of other domains, including the master routing
instance domain.
Primary AS number.
Path reference count.
Number of known AS paths.
Information about the AS path:
—Path contains an AS loop.
ASLoop
—Path includes the ATOMIC_AGGREGATE path attribute.
Atomic
—Path was created by local aggregation.
Local
—Path was created by the master routing instance.
Master
AS number of the local routing device.
How many times this AS number can appear in an AS path.
command.
2067