Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2359

show route range
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show route range show route range
Copyright © 2010, Juniper Networks, Inc.
show route range
<brief | detail | extensive | terse>
<destination-prefix>
<logical-system (all | logical-system-name)>
show route range
<brief | detail | extensive | terse>
<destination-prefix>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display routing table entries using a prefix range.
—Display standard information about all routing table entries using a prefix range.
none
brief | detail | extensive | terse
not specify a level of output, the system defaults to
destination-prefix —(Optional) Destination and prefix mask for the range.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show route range on page 2263
show route range destination-prefix on page 2264
show route range detail on page 2264
show route range extensive on page 2265
show route range terse on page 2266
For information about output fields, see the output field tables for the show route
command, the show route detail command, the show route extensive command, or the
show route terse command.
user@host> show route range
inet.0: 11 destinations, 11 routes (10 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
10.10.0.0/16 *[Static/5] 00:30:01
> to 192.168.71.254 via fxp0.0
10.209.0.0/16 *[Static/5] 00:30:01
> to 192.168.71.254 via fxp0.0
10.255.71.14/32 *[Direct/0] 00:30:01
> via lo0.0
172.16.0.0/12 *[Static/5] 00:30:01
> to 192.168.71.254 via fxp0.0
192.168.0.0/16 *[Static/5] 00:30:01
> to 192.168.71.254 via fxp0.0
Chapter 74: Operational Commands for Layer 3 Protocols
—(Optional) Display the specified level of output. If you do
—(Optional) Perform this operation on all logical
.
brief
2263