Show Route Table - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show route table

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Copyright © 2010, Juniper Networks, Inc.
show route table routing-table-name
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route table routing-table-name
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display the route entries in a particular routing table.
brief | detail | extensive | terse
logical-system (all | logical-system-name)
systems or on a particular logical system.
—Display information about a particular routing table (for example,
routing-table-name
inet.0 ) where policy-based export is currently enabled. (For information about the
different types of routing tables, see the Junos Routing Protocols Configuration Guide.)
view
show route summary on page 2291
show route table bgp.l2.vpn on page 2294
show route table bgp.l3vpn.0 on page 2294
show route table bgp.l3vpn.0 detail on page 2294
show route table inet.0 on page 2295
show route table inet6.0 on page 2296
show route table inet6.3 on page 2296
show route table l2circuit.0 on page 2296
show route table mpls on page 2297
show route table mpls extensive on page 2297
show route table mpls.0 on page 2297
show route table vpls_1 detail on page 2298
show route table vpn-a on page 2298
show route table vpn-a.mdt.0 on page 2298
show route table VPN-AB.inet.0 on page 2298
show route table VPN_blue.mvpn-inet6.0 on page 2299
For information about output fields, see the output field tables for the show route
command, the show route detail command, the show route extensive command, or the
show route terse command.
Chapter 74: Operational Commands for Layer 3 Protocols
—(Optional) Display the specified level of output.
—(Optional) Perform this operation on all logical
2293