Show Route; Table 283: Show Route Output Fields - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

show route

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields

Table 283: show route Output Fields

Field Name Field Description
Name of the routing table (for example,
routing-table-name
Number of destinations for which there are routes in the routing table.
number destinations
2164
®
OS for EX Series Ethernet Switches, Release 10.3
show route
<all>
<destination-prefix>
<logical-system (all | logical-system-name)>
<private>
show route
<all>
<destination-prefix>
<private>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced in Junos OS Release 9.5.
private
option introduced in Junos OS Release 9.5 for EX Series switches.
private
Display the active entries in the routing tables.
—Display brief information about all active entries in the routing tables.
none
all —(Optional) Display information about all routing tables, including private, or internal,
routing tables.
—(Optional) Display active entries for the specified address or range of
destination-prefix
addresses.
logical-system (all | logical-system-name)
systems or on a particular logical system.
—(Optional) Display information only about all private, or internal, routing tables.
private
view
show route on page 2167
show route destination-prefix on page 2167
Table 283 on page 2164 describes the output fields for the
fields are listed in the approximate order in which they appear.
—(Optional) Perform this operation on all logical
show route
).
inet.0
Copyright © 2010, Juniper Networks, Inc.
command. Output