Show Isis Backup Spf Results - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show isis backup spf results

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Copyright © 2010, Juniper Networks, Inc.
show isis backup spf results
<instance instance-name>
<level (1 | 2)>
<logical-system (all | logical-system-name)>
<no-coverage>
<topology (ipv4-unicast | ipv6-multicast | ipv6-unicast | unicast)>
show isis backup spf results
<instance instance-name>
<level (1 | 2)>
<no-coverage>
<topology (ipv4-unicast | unicast)>
Command introduced in Junos OS Release 9.5.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Display information about IS-IS shortest-path-first (SPF) calculations for backup paths.
none —Display information about IS-IS shortest-path-first (SPF) calculations for all
backup paths for all destination nodes.
—(Optional) Display SPF calculations for backup paths for the
instance instance-name
specified routing instance.
level (1 | 2) —(Optional) Display SPF calculations for the backup paths for the specified
IS-IS level.
logical-system logical-system-name
paths for all logical systems or on a particular logical system.
—(Optional) Display SPF calculations only for destinations that do not have
no-coverage
backup coverage.
topology (ipv4-multicast | ipv6-multicast | ipv6-unicast | unicast)
calculations for backup paths for the specified topology only.
view
show isis backup coverage on page 2101
show isis backup spf results on page 2106
Table 266 on page 2106 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 74: Operational Commands for Layer 3 Protocols
—(Optional) Display SPF calculations for the backup
show isis backup spf results
—(Optional) Display SPF
command.
2105