Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2213

Table 269: show isis interface Output Fields (continued)
Field Name Field Description
Circuit type:
Circuit type
—Level 1 only
1
—Level 2 only
2
3 —Level 1 and Level 2
Interval between link-state PDUs sent from the interface.
LSP interval
Interval between complete sequence number PDUs sent from the interface.
CSNP interval
System identifier.
Sysid
Interface through which the adjacency is made.
Interface
Level:
L or Level
—Level 1 only
1
—Level 2 only
2
—Level 1 and Level 2
3
Circuit identifier.
CirID
Level 1 designated intermediate system.
Level 1 DR
Level 2 designated intermediate system.
Level 2 DR
Interface's metric for Level 1 and Level 2. If there is no information, the metric
L1/L2 Metric
is 0 .
Adjacency This routing device has signaled not to advertise this interface to its neighbors
advertisement: in their label-switched paths (LSPs).
Advertise
This neighbor has signaled not to advertise this interface in the routing device's
Adjacency
outbound LSPs.
advertisement:
Suppress
Number of adjacencies established on this interface.
Adjacencies
Priority value for this interface.
Priority
Metric value for this interface.
Metric
/ Interface's hello interval.
Hello(s) Hello
Interval
/ Interface's hold time.
Hold(s) Hold
Time
Copyright © 2010, Juniper Networks, Inc.
Chapter 74: Operational Commands for Layer 3 Protocols
Level of Output
detail
detail
detail extensive
detail
none
brief
All levels
none
brief
none
brief
none
brief
none
brief
detail extensive
detail extensive
detail
detail
detail
detail extensive
detail extensive
2117