Juniper JUNOS OS 10.3 - SOFTWARE Manual page 2285

Table 284: show route damping Output Fields (continued)
Field Name Field Description
How long the route has been known.
Age
Metric for the route.
Metric
Name of the protocol that has added the route.
Task
List of protocols that announce this route.
Announcement
route is used for route resolution for next hops found in the routing table.
bits
an index used by Juniper Networks customer support only.
AS path through which the route was learned. The letters at the end of the AS
AS path
path indicate the path origin, providing an indication of the state of the route at
the point at which the AS path originated:
I —IGP.
—EGP.
E
—Incomplete; typically, the AS path was aggregated.
?
When AS path numbers are included in the route, the format is as follows:
—Brackets enclose the local AS number associated with the AS path if
[ ]
more than one AS number is configured on the routing device or if AS path
prepending is configured.
—Braces enclose AS sets, which are groups of AS numbers in which the
{ }
order does not matter. A set commonly results from route aggregation. The
numbers in each AS set are displayed in ascending order.
—Parentheses enclose a confederation.
( )
( [ ] )
to Next hop to the destination. An angle bracket (>) indicates that the route is the
selected route.
Interface used to reach the next hop. If there is more than one interface available
via
to the next hop, the interface that is actually used is followed by the word
Selected
Community path attribute for the route. See the output field table for the show
Communities
route detail command.
Localpref Local preference value included in the route.
Router ID BGP router ID as advertised by the neighbor in the open message.
Merit (last Last updated and current figure-of-merit value.
update/now)
damping-parameters Name that identifies the damping parameters used, which is defined in the
damping statement at the
Time of most recent change in path attributes.
Last update
Copyright © 2010, Juniper Networks, Inc.
—Parentheses and brackets enclose a confederation set.
.
[edit policy-options]
Chapter 74: Operational Commands for Layer 3 Protocols
indicates that the
n-Resolve inet
hierarchy level.
Level of Output
detail extensive
detail extensive
detail extensive
detail extensive
is
n
All levels
brief none
none
brief
detail extensive
All levels
detail extensive
detail extensive
detail extensive
detail extensive
2189