Table of Contents
Advertisement
Service
13.4
Maintenance
The maximum scope for all main devices and options is listed below. Observe the
equipment that is applicable for the present device.
Component
CO
absorber/soda lime
2
with disposable dust fil-
ter
Water trap
Flow sensors
Piston diaphragm
O
sensor cell
2
AGS
AGS particle filter
O-rings on the water
trap holder
Pressure reducers
Filter cloth
– Above the gas mixer
– Power supply unit
CLIC adapter
Lead battery (2 pieces)
1) The replacement is described in the separate reprocessing instructions for the anesthesia machine. The reprocessing
instructions are included in the delivery of the anesthesia machine.
It is recommended that only original parts from Dräger are used and that the parts
are replaced by DrägerService.
A service contract with DrägerService is recommended.
13.5
Repair
Repairs may be performed only by specialized service personnel.
It is recommended that only original parts from Dräger are used and that the parts
are replaced by DrägerService.
A service contract with DrägerService is recommended.
270
Interval
When colored violet or
according to the config-
ured Infinity ID replace-
ment interval
As required, when
soiled, or according to
the configured Infinity ID
replacement interval
As required, if calibra-
tion is no longer possi-
ble, or according to the
configured Infinity ID
replacement interval
Annually
Every 2 years
As required, when
soiled
If required, if filter is
soiled, or flow is no lon-
ger achieved
Every 2 years
Every 6 years
Every 2 years
Every 4 years
Every 2 years
Instructions for use
Measure
Replace, see page 93
Replace, see page 95
Replace, see page 240 Users
1)
Replace
Replace, see page 69
Replace
Replace
Replace
Replace
Replace
Replace
Replace
|
Atlan A100 (XL), A300 (XL), A350 (XL) SW 2.1n
User group
Users
Users
Users
Users
Specialized service per-
sonnel
Users
Service personnel
Specialized service per-
sonnel
Service personnel
Users
Service personnel
Advertisement
Table of Contents
