Table of Contents
Advertisement
Assembly and preparation
1. Connect one end of the sample line to the water trap (1).
2. Connect the other end of the sample line to a suitable port (2), e.g., on a filter,
HME, Y-piece, tube adapter, or hose adapter (see "Permissible hose
configurations", page 87).
3. Ensure the following:
– Ensure the correct course of the sample line.
– Particularly when ventilating pediatric patients and neonates, a sample line
– Particularly when ventilating pediatric patients and neonates, ensure a small
96
connection close to the patient can improve the quality of the measured CO
values. Observe the following information: "CO
patients and neonates", page 321.
volume (dead space) (e.g., for HMEs or for tube adapters for connecting the
sample line).
Instructions for use
measurement with pediatric
2
|
Atlan A100 (XL), A300 (XL), A350 (XL) SW 2.1n
2
Advertisement
Table of Contents
