17.4
Overview of the menu structure
The following tables list the buttons of the main menu bar with the resulting dialogs
of the same name and the tabs. For further information see: "Operating concept",
page 97. The structure of the main screen and the dialogs is illustrated on pages 97
and 98.
Group
Button in main menu
bar
Alarms...
1),2),3)
CO
alarms off
2
1),4)
Autoset limits
1),5)
Exit CBM
1) Only during operation, not in Standby mode
2) Only available for the device equipped with integrated patient-gas measurement module
3) Only in the modes: Manual / Spontaneous, Ext. FGO, Pause, Monitoring
4) Only in the modes: PSV, PC, VC - CMV / AutoFlow, VC - CMV
5) Only in CBM mode
Group
Button in main menu
bar
1)
Views...
1)
1 2 3
View
1)
1 2 3
View
1)
1 2 3
View
Export screenshot
1) Only during operation, not in Standby mode
|
Instructions for use
Atlan A100 (XL), A300 (XL), A350 (XL) SW 2.1n
Horizontal tab
Vertical tab
Limits
Current alarms
Logbook
Settings
Horizontal tab
Vertical tab
Description
Display or change alarm limits.
Display information on active alarms.
View alarm logbook.
Set the alarm volume.
Activating or deactivating CO
Switch CBM mode on or off
Deactivate CO
alarms.
2
Automatically adapt alarm limits to current
measured or set values.
Exit CBM mode.
Description
Switch to other configured views.
Reset current view to start setting.
Display alarm limits, units, mini-trends,
and loops.
Switching between the 3 configured
views.
Export screenshot to a USB mass storage
device.
Annex
1),2)
alarms
.
2
1)
.
337