Table of Contents
Advertisement
3.2.5
Additional operation modes
Indication of availability
The available equipment for the main devices is shown in the tables below and is
identified as follows:
Indicator
---
Operation mode
External fresh-gas outlet
Pause
Monitoring
CBM mode
1) Pause must be activated in the system setup.
2) Only for devices with integrated PGM.
3) Pause must be deactivated in the system setup.
3.2.6
Monitoring functions
The device can monitor the following:
– Airway pressure
– Minute volume, tidal volume
– Inspiratory O
– Expiratory O
measurement module)
– Inspiratory and expiratory anesthetic gas concentrations (only available with the
integrated patient-gas measurement module)
– Inspiratory and expiratory CO
patient-gas measurement module)
– Inspiratory and expiratory N
patient-gas measurement module)
– Respiratory rate, apnea (derived from pressure, flow, and CO
– Occurrence of anesthetic gas mixtures (only available with the integrated
patient-gas measurement module)
– Lack of fresh gas in the breathing system and the breathing circuit
|
Instructions for use
Atlan A100 (XL), A300 (XL), A350 (XL) SW 2.1n
Meaning
The main device has this equipment.
The equipment is available as an option.
The equipment is not available.
2)
concentration
2
concentration (only available with the integrated patient-gas
2
2
O concentrations (only available with the integrated
2
A100 (XL)
---
concentrations (only available with the integrated
Overview
Main device
A300 (XL)
A350 (XL)
1)
1)
3)
3)
)
2
47
Advertisement
Table of Contents
