Table of Contents
Advertisement
Configuration
11.5.8
Resetting the consumptions
Prerequisite: The device has the "advanced gas monitoring" software option.
The gas consumption values can be reset in Standby > System setup > System
status > Consumption.
● Touch the Reset data button and confirm.
11.5.9
General device information
Further information is displayed in Standby > System setup > System status:
No.
1
2
● Scan the QR code with suitable equipment.
The QR code is decoded into an internet address which enables access to the
stated information in a browser.
222
System setup
2
Designation
General information
– Installed software version
– Next maintenance date
QR code for further product information
This information can be retrieved:
– Device description
– Software options
– Available accessories
– Service options
Instructions for use
|
Atlan A100 (XL), A300 (XL), A350 (XL) SW 2.1n
1
Advertisement
Table of Contents
