Table of Contents
Advertisement
Priority
Alarm
!!! 220
Apnea (no pressure)
!! 255
Apnea (no pressure)
!! 90
Apnea Ventilation
!
0
Apnea Ventilation
!!! 100
Backup manual mode
activated
!
100
Backup manual mode
activated
!! 100
Backup speaker failure
|
Instructions for use
Atlan A100 (XL), A300 (XL), A350 (XL) SW 2.1n
Cause
No breathing or ventilation.
Fresh-gas flow is insuffi-
cient, breathing bag is
blocked or positioned incor-
rectly.
The breathing hoses are
blocked or leaking.
No breathing or ventilation.
Fresh-gas flow is insuffi-
cient, breathing bag is
blocked or positioned incor-
rectly.
The breathing hoses are
blocked or leaking.
No inspiratory effort of the
patient detected.
No inspiratory effort of the
patient detected.
The backup manual switch
has been activated.
The backup manual switch
has been activated.
The backup speaker for
alarm tones is faulty.
Troubleshooting
Remedy
Start manual ventilation!
Check ventilation settings.
Check fresh-gas settings and
position of breathing bag.
Check breathing circuit and
tube.
Start manual ventilation!
Check ventilation settings.
Check fresh-gas settings and
position of breathing bag.
Check breathing circuit and
tube.
Check spontaneous breath-
ing ability of the patient.
Adjust the setting for "Trig-
ger".
Change to pressure-con-
trolled or volume-controlled
ventilation mode.
Use "ALARM RESET" to
downgrade alarm priority.
Check spontaneous breath-
ing ability of the patient.
Adjust the setting for "Trig-
ger".
Change to pressure-con-
trolled or volume-controlled
ventilation mode.
Start manual ventilation!
Check vaporizer and fresh-
gas settings.
To exit backup manual mode,
return the switch to its normal
position.
Start manual ventilation!
Check vaporizer and fresh-
gas settings.
To exit backup manual mode,
return the switch to its normal
position.
Call Dräger.
Use "ALARM RESET" to
reset alarm.
249
Advertisement
Table of Contents
