Table of Contents
Advertisement
Overview
3.1.8
Connectors
No.
1
2
3
4
5
6
7
30
Designation
Serial port (COM 1 and
COM 2)
Main switch
Connector for workplace light
Power inlet (connector for
power cable)
Potential equalization pin
Network port
USB port
Instructions for use
Description
This serial port (RS232) supports the MEDI-
BUS.X protocol for data exchange between
the anesthesia machine and external
devices.
Turns the device off and minimizes the cur-
rent consumption when the power plug is
pulled out. To be used when the device is to
be disconnected from the power supply for
longer than 2 weeks and during service
activities.
Used for connecting an external workplace
light.
Used to connect the device to the mains
power supply.
Used for connecting a potential equalization
cable. This will minimize differences in elec-
trical potential.
Enables data transfer within an IT network.
Used to transfer data to a USB mass stor-
age device.
|
Atlan A100 (XL), A300 (XL), A350 (XL) SW 2.1n
Advertisement
Table of Contents
