Dräger Atlan A100 Instructions For Use Manual page 218

Anesthesia workstation
Hide thumbs Also See for Atlan A100:
Table of Contents

Advertisement

Configuration
11.5.6.2
Vertical tab "Units"
Headline/
Parameter
Weight
Height
(Applies only to the mechanically con-
(Applies only to the electronically con-
trolled gas mixer and the mechanically
controlled gas mixer with electronic flow
Airway pressure
Supply pressure
CO
2
Volatile agents
11.5.6.3
Vertical tab "Auto On"
Headline/
Parameter
Auto On
Day and time
Monday to Sunday; hour : Minute
Monday to Friday: 6:30
Saturday & Sunday: Off
When completed Standby/Shut down
218
Setting range
kg; lb
cm, m; in, ft
trolled gas mixer with flow tubes.)
cm; in
measurement.)
mbar; hPa; cmH
bar; kPa×100; psi; MPa
%; kPa; mmHg
%; kPa
Setting range
Instructions for use
Sets the units.
O
2
Sets the Auto On software option. The
device provides a calendar function
which, when the device is shut down,
suggests the next time the device
should be ready for use, depending on
the weekday. To activate the automatic
ready-for-use time for a desired day,
select the corresponding day and set
the time, see page 189.
Pay attention to the correct setting of
the gas supplies to be tested, see
page 219.
|
Atlan A100 (XL), A300 (XL), A350 (XL) SW 2.1n
Description
Description

Advertisement

Table of Contents
loading

Table of Contents