Dräger Atlan A100 Instructions For Use Manual page 221

11.5.6.8 Vertical tab "Infinity ID"
Headline/
Parameter
Monitoring of Infinity ID accessories
Breathing circuit
Water trap
Flow sensors
CO absorber
2
Exchange interval [days]
Breathing circuit
Water trap
Flow sensors
CO absorber
2
11.5.6.9 Vertical tab "Service"
Headline/
Parameter
Service password
11.5.7 Resetting the start settings
Certain pages in the System setup dialog have a button for resetting the respective
start settings to the factory defaults.
11.5.7.1 Resetting the changes on a page
1. Open the appropriate tab.
2. Touch the Factory defaults button and confirm.
|
Instructions for use Atlan A100 (XL), A300 (XL), A350 (XL) SW 2.1n
Setting range
On; Off
On; Off
On; Off
On; Off
Off; 2 to 9
2
Off; 28
Off; 1 to 180
90
Off; 1 to 28
7
Setting range
Description
Activates or deactivates the Infinity ID
functionality.
On:
– Generates a message when the
maximum period of use is exceeded
– Generates a message when
Infinity ID breathing hoses are incor-
rectly connected
Off:
– Messages are suppressed.
Specifies the replacement intervals for
Infinity ID accessories.
Description
The following functions are available
after the appropriate credentials have
been entered:
– Access to the service dialog
If the password needs to be reset, con-
tact specialized service personnel.
Configuration
221