Dräger Atlan A100 Instructions For Use Manual page 48

Anesthesia workstation
Hide thumbs Also See for Atlan A100:
Table of Contents

Advertisement

Overview
3.2.7
Display on the screen
The device can display the following information on the integrated screen:
– Waveforms
– Graphical trends
– Numeric trends
– Loops
– Alarm logbook
– Logbook
– Numeric parameters
– Low-flow wizard
– Econometer
3.2.8
Logbook
The device can capture and store the following data, among other things:
– Measured values
– Set values and related changes
– Patient data
– Ventilation modes
– Events (e.g., alarms, reset alarms, switch-on time and switch-off time)
– Test results
– Gas consumption
– Anesthetic agent consumption
3.2.9
Gas supply
The device can be supplied with up to three medical gases:
Gas
O
2
Air
N
O
2
3.2.10
Gas scavenging
The gas can be scavenged by means of the following procedures:
– Active anesthetic gas scavenging
– Passive anesthetic gas scavenging
Further information can be found on page 81.
48
Central
Gas cylinders
supply
Yes
Permanently mounted Dräger pressure reducer
or
Third-party manufacturer pressure reducer
Yes
Permanently mounted Dräger pressure reducer
or
Yes
Third-party manufacturer pressure reducer
|
Instructions for use
Atlan A100 (XL), A300 (XL), A350 (XL) SW 2.1n

Advertisement

Table of Contents
loading

Table of Contents