Table of Contents
Advertisement
Configuration
11.5.6.6
Vertical tab "Sound volume"
Headline/
Parameter
Alarm volume
Minimum alarm
volume
11.5.6.7
Vertical tab "Interfaces"
Headline/
Parameter
LAN
DHCP
IP address
Subnet mask
Default gateway
MAC address
COM 1
Protocol
Baud rate 1200; 2400; 4800; 9600; 19200; 38400
COM 2
Protocol
Baud rate 1200; 2400; 4800; 9600; 19200; 38400
USB
USB interface
220
Setting range
10 to 100
40
10 to 100
10
Setting range
On; Off
XXX . XXX . XXX . XXX
XXX . XXX . XXX . XXX
XXX . XXX . XXX . XXX
MEDIBUS.X; None
MEDIBUS.X; None
On; Off
Instructions for use
Sets the alarm volume.
Sets the minimum volume with which
an alarm tone will be signaled.
Configuration of the network
Specifies settings for the network.
When using DHCP, consult with IT per-
sonnel to ensure that the device is
always assigned the same IP address
by the DHCP server.
Restart the device after each change to
the network settings. The network set-
tings are not affected by a reset to fac-
tory defaults.
Apply the changes to IP address, Sub-
net mask, or Default gateway with the
Apply button. The changes are only
active after the device has been
restarted.
Displays the MAC address.
Configures the COM port.
A baud rate of 19200 or 38400 is
required for transmission of high-speed
data, e.g., for waveforms.
Activates or deactivates the USB port.
|
Atlan A100 (XL), A300 (XL), A350 (XL) SW 2.1n
Description
Description
Advertisement
Table of Contents
