Table of Contents
Advertisement
Operation
For creating entries and the associated settings, see page 184.
8.8.3
Trends
Prerequisite: The device has the "advanced trends" or "loops and trends" software
option.
Trends contain different measured values from the current case and are displayed
as tables or graphics.
1. Open the Trends/Data dialog.
2. Touch the Graphical trends tab (1) or the Tabular trends tab (2).
The following illustration shows the graphical trend:
The vertical tabs (3) contain various combinations of parameters.
Zooming
In both trend displays, the displayed time period can be increased or decreased in
increments between the last 30 minutes and the last 24 hours.
Changing the time period:
● Touch the Zoom + or Zoom - button (4):
Displaying the standard time period and the current point in time:
● Touch the Reset zoom button (5).
Moving the cursor
The exact measured values for a specific point in time are displayed numerically in
area (6). To view the values, move the cursor to the corresponding position.
The following options are available for moving the cursor:
● Use the rotary knob to move the cursor (7).
● Touch the corresponding area on the screen.
176
1
2
Trends/Data
Instructions for use
7
6
|
Atlan A100 (XL), A300 (XL), A350 (XL) SW 2.1n
3
4
5
Advertisement
Table of Contents
