Report Options - Micromeritics ASAP 2020 Confirm Operator's Manual

ASAP 2020 Confirm
10. Click one of the following:
• Real gas equation of state, then use Open to select a table.
• Ideal gas law with non-ideality correction, then enter a Non-ideality factor.
11. Click
Save;
12. Ensure that the description is as desired, then click
Adsorptive Properties file dialog. If
and must be edited. The ASAP 2020 confirm program does not allow duplicate
descriptions.
13. Click
Close

Report Options

Report options files specify the type of reports which can be generated from an analysis or
from manually entered data. They also contain report details such as axis scale, axis range,
and column headings. These report options files may be used to generate reports
automatically at any time during or after the analysis. Of course, reports generated during
analysis can only report on data collected up to the time of the report.
Report options files may contain tabular reports only, plots only, or both tabular reports and
plots. They may also contain user-defined report tables.
Report options files also may be defined to include overlay options. The ASAP 2020 program
enables you to overlay up to eight plots of different samples onto a ninth plot of the same
type. Or you can overlay one plot type onto a different plot type from the same analysis.
Refer to Generating Graph Overlays
Perform the following steps to define a report options file:
1. Select File > New > Report options; the Create a Report Options File dialog containing
the available templates is displayed.
3-8
the Save As Adsorptive Properties File dialog is displayed.
to close the dialog.
, page
to save the file and return to the
Save
is disabled, the description is a duplicate one
Save
3-34.
Creating Parameter Files
202-42811-01 - Mar 2011