Micromeritics ASAP 2020 Confirm Operator's Manual page 45

Creating Parameter Files
2. Choose a template, then click
3. Enter a description (up to 42 characters) in the Description field. Enter an identifier that
gives a more intuitive description of the files contents. For example, BJH Adsorption
Report Options.
4. Select Show report title and enter the title you wish to appear at the top of the report. Or
deselect this option if you prefer not to have a report title.
If your company logo exists as a bitmap (bmp) or enhanced metafile (emf), you can
have it display in the report header by selecting Show graphic. Click Browse to select
the file; use the Height and Width fields to specify the size.
5. If you wish to compare the same type of graph from multiple files, click
choose the files. Then be sure you edit the graph from the Selected Reports window and
choose Samples from the Overlay drop-down list.
6. The reports that may be generated are listed in the Selected Reports list. Select reports by
double-clicking on the desired report, or highlight the report and press the spacebar.
Reports are deselected in the same manner. A report is selected when it is preceded by a
check mark. You can edit details of some reports by highlighting the desired report and
clicking
7. Click
Save
8. Ensure that the description is as desired, then click
Report Options file dialog. If it is disabled, the description is a duplicate one and must be
edited.
9. Click
Close
202-42811-01 - Mar 2011
Create
.
Edit
; the Save As Report Options File dialog is displayed.
to close the dialog.
; the Report Options dialog is displayed:
to save the file and return to the
Save
ASAP 2020 Confirm
and
Overlays
3-9