Micromeritics ASAP 2020 Confirm Operator's Manual page 136

ASAP 2020 Confirm
Relative pressure range
Tabular report
f-Plot
Overlay samples
Autoscale x-axis
Autoscale y-axis
From/To fields
4-60
Allows you to enter a pressure range when calculations
assignments are not used.
Choose this option to have a tabular report generated The
tabular report contains four columns: relative pressure,
quantity adsorbed for the isotherm of interest, quantity
adsorbed for the reference isotherm, and the ratio of the
quantities adsorbed.
Choose this option to have the data plotted as a graph.
Allows you to overlay data from the current sample file with
data from other sample file(s). The other sample file(s) are
chosen by clicking
Overlays
screen.
Select these options to have the X- and/or Y-axes scaled
automatically.
Both X- and Y-axes begin at zero; the system uses the highest
values collected during analysis as the ending points.
If you choose not to autoscale data, the From and To fields
are enabled, allowing you to enter the ranges.
Enabled when you choose not to autoscale data (deselect the
Autoscale option), allowing you to specify the beginning and
ending ranges of the X- and/or Y-axis. Data collected outside
these ranges are not included in the plot.
on the main Report Options
202-42811-01 - Mar 2011
New