Summary Report - Micromeritics ASAP 2020 Confirm Operator's Manual

ASAP 2020 Confirm

Summary Report

The Summary report provides a condensed listing of analysis statistics and data results. The
Summary Report Options dialog allows you to choose the type of information to include in the
report.
The choices on this dialog allow you to choose the types of data to include in the Summary
report.
If you choose Adsorption or Desorption total for Pore Volume data, the P/Po field is enabled
so that you can enter the relative pressure at which to calculate the total pore volume. If Use
calculation assignments (Collected Data screen) is not selected, the isotherm is interpolated
to this value and that point used for the Total pore volume calculation. Otherwise, the point
selected with calculation assignment is used.
This dialog also enables you to specify Pass/Fail criteria for up to four parameters.
Select All
Deselect All
Pass/Fail Selection
4-38
Selects all choices on the dialog.
Deselects all choices on the dialog.
Displays the parameter you selected on the Pass/Fail Options
dialog.
New
202-42811-01 - Mar 2011