Micromeritics ASAP 2020 Confirm Operator's Manual page 75

Generating Graph Overlays
5. From the Selected Reports list, select the report for which you want multiple graph
overlays, then select
example shows BJH Adsorption).
6. Select a graph type, then click
(this example shows Cumulative Pore Volume).
7. Click the down arrow at the Overlay field and select a graph type from the list. This
selection will be overlaid on the graph selected in the Variable field.
8. Select
OK
9. Click
OK
10. Click
Save
regarding overlays and anything else are available as your reports are run.
11. Select Reports >Start Report; the Start Report dialog is displayed with the name of your
primary file highlighted.
202-42811-01 - Mar 2011
; a Report Options dialog for that report is displayed (this
Edit
Edit
to return to the BJH Adsorption report Options dialog; do any editing you wish.
to return to the main Report Options dialog.
to save your Selected Reports list. Even if you don't save, all of the options
; an options dialog for that specific item is displayed
ASAP 2020 Confirm
3-39