Analysis Conditions - Micromeritics ASAP 2020 Confirm Operator's Manual

Creating Parameter Files
4. Specify values for the evacuation and heating phases for degassing the sample
5. Click
Save
6. Ensure that the description is as desired, then click
Degas Conditions file dialog. If
must be edited. The ASAP 2020 Confirm program does not allow duplicate descriptions.
7. Click
Close

Analysis Conditions

Analysis conditions specify the data used to guide an analysis.
Perform the following steps to create an analysis conditions file:
1. Select New, Analysis conditions from the File menu; the Create an Analysis Conditions
File dialog containing the available templates is displayed.
2. Choose a template then click
These items do
not display if
the ROA option
is not installed.
3. Enter a description in the Description field. Be sure to use an intuitive description so that
you can recognize it easily.
4. Specify points for your pressure table. Use the push buttons adjacent to the table to assist
you in creating your table.
5. Click
Preparation
202-42811-01 - Mar 2011
; the Save As Degas Conditions File dialog is displayed.
Save
to close the dialog box.
Create
to specify evacuation and leak test values.
to save the file and return to the
Save
is disabled, the description is a duplicate one and
; the Analysis Conditions dialog is displayed:
ASAP 2020 Confirm
3-5