Micromeritics ASAP 2020 Confirm Operator's Manual page 303

Appendix B
2450- Sample Defaults may not be edited while this operation is in progress. Do you
wish to save and close the Sample Defaults edit session?
Cause:
Action:
2452- Attempt to write MICATTR.DIR in read only mode. (file name)
2453- Attempt to append MICATTR.DIR in read only mode. (file name)
Cause:
Action:
2454- Too many selections for a print-to-file operation. Only the first (number) selec-
tions will be processed. Please reselect the remainder.
2455- Too many selections for an export-to-file operation. Only the first (number)
selections will be processed. Please reselect the remainder.
Cause:
Action:
2456- Insufficient file handles available. Application cannot continue.
Cause:
Action:
202-42811-01 - Mar 2011
You are in the process of initiating an automatic analysis (an analysis in
which sample files are created using the defaults) while editing the
defaults.
Finish your edit session of the defaults and close the dialog. Then
restart the automatic analysis.
The Read-Only attribute is turned on in the application's
MICATTR.DIR file (this file exists in each folder containing sample or
parameter files).
Use Windows Explorer to access the folder containing the
MICATTR.DIR file and disable the Read-Only option.
You selected too many files for this operation.
Select only the number of files specified in the message.
You have more than 50 files open at the same time.
Refer to the manual for your operating system and set the limit for
open files to 50 or greater.
ASAP 2020 Confirm
B-9