Degas Conditions - Micromeritics ASAP 2020 Confirm Operator's Manual

ASAP 2020 Confirm
4. Click
Load from Sample File;
5. Select the file you used in the blank run with this sample tube, then click Open to copy the
warm and cold free space values into the Sample Tube dialog.
6. Select whether an isothermal jacket and/or filler rod is(are) being used.
7. If a vacuum seal of some type was used, select the appropriate option or leave the default
of None selected.
8. Click
Save
9. Ensure that the description is as desired, then click
Sample Tube file dialog. If
edited. The ASAP 2020 Confirm program does not allow duplicate descriptions.
10. Click
Close

Degas Conditions

Degas Conditions files contain degassing information for sample preparation. These files
apply only if your ASAP 2020 analyzer is equipped with the SmartVac degassing system.
Perform the following steps to create a degas conditions file:
1. Select New, Degas conditions from the File menu; the Create a Degas Conditions File
dialog containing the available templates is displayed.
2. Choose a template, then click
3. Enter a description in the Description field. Be sure to use an intuitive description so that
you can recognize it easily.
3-4
the Open Sample Information File dialog is displayed.
; the Save As Sample Tube dialog is displayed.
is disabled, the description is a duplicate one and must be
Save
to close the dialog box.
Create
to save the file and return to the
Save
; the Degas Conditions dialog is displayed:
Creating Parameter Files
202-42811-01 - Mar 2011