Micromeritics ASAP 2020 Confirm Operator's Manual page 343

Appendix B
6510- Error evacuating.
Cause:
Action:
6511- Error dosing.
Cause:
Action:
6512- Error calibrating the servo.
Cause:
Action:
6513- Error waiting for pressure to drop.
Cause:
Action:
6514- Problem encountered dosing to target [PR2] [PR-U], last pressure = [PR4] [PR-
U], elapsed time = [0]:[0].
Cause:
Action:
202-42811-01 - Mar 2011
An evacuation error occurred during a degas operation.
If the problem persists, contact a Micromeritics service representative.
A dosing error occurred during a degas operation.
If the problem persists, contact a Micromeritics service representative.
An error occurred while calibrating the servo valve.
If the problem persists, contact a Micromeritics service representative.
A pressure error occurred during a degas operation.
If the problem persists, contact a Micromeritics service representative.
Dosing during an analysis did not come within the allowed range of the
target.
Check that the outlet stage of the gas regulator is within specification.
If the problem occurs frequently contact a Micromeritics service rep-
resentative.
ASAP 2020 Confirm
B-49