Micromeritics ASAP 2020 Confirm Operator's Manual page 38

ASAP 2020 Confirm
3. Choose a file, then click
4. Edit the fields of all parameters (click the tabs to access each parameter) as desired.
5. Select File > Save As Template, then choose:
• Sample information to save all parameters as a sample file template; the Save As
Sample Template dialog is displayed. You can also click
Sample Information dialog if you are saving all parameters as a template. You cannot
save parameter file templates using this push button.
• a parameter file to save the values of one of the parameters as a parameter file template.
For example, select Analysis conditions to save the values in the Analysis conditions
dialog box as a template for Analysis conditions files.
You can also create parameter file templates using existing parameter files.
6. Enter an appropriate description in the ID field; you can use up to 42 characters. Be sure to
use an intuitive description.
7. Click
Save; the Save as Sample Template dialog is displayed.
8. Click
Save
containing the same description currently exists. Edit the description to enable
ASAP 2020 confirm program does not allow duplicate file descriptions.
9. Click
Close
(file name) has been changed. Save changes before closing?
10. Click
No
3-2
; the Sample Information dialog is displayed.
Open
to save the sample template. If
on the No Analysis sample file; the following error message is displayed:
(unless you wish to save the changes made) to close the dialog.
Save As Template
does not become enabled, a file
Save
202-42811-01 - Mar 2011
Creating File Templates
on the
. The
Save